|
|
    |
|
 |
| Dialup Setup Information :
For specific instructions to set up your computer to automatically dial SurfAnytime and connect to the internet, we have easy to use, step-by-step instructions for:
|
| 1.
Click "Start", "Settings", and then
"Control Panel". Within "Control Panel",
double-click "Dial-Up Networking" icon, and then
double-click the "Make New Connection" icon to
open the setup wizard.
2. For the "Type a name for the computer you are dialing" section, type SurfAnytime. If your system's modem is not listed in the "Select a modem" section, select your modem type from that pull-down menu. Now click on the Multilink tab, select 'use additional devices' then click 'add'. Select the second ISDN modem and enter the exact same telephone number as previous. and click "Next". 3. Within the "Area Code" and "Telephone Number" sections, type the SurfAnytime dialup number that is local to your area, and click "Next". SurfAnytime's dialup numbers can be found at http://www.surfanytime.net/support4. A confirmation will verify that you created a new Dial-Up Networking connection called "SurfAnytime", and you can click "Finish" at this point. 5. From here, you can create a shortcut icon for the SurfAnytime dialer on your desktop screen. Click "Start", "Settings", and then "Control Panel". Within "Control Panel", double-click the "Dial-Up Networking" icon, and you should see an icon titled "SurfAnytime".6. You should see a separate icon for the SurfAnytime dialer you just created. Right mouse-click over that icon, and select "Create Shortcut". 7. You should receive this message - "Windows cannot create a shortcut here. Do you want the shortcut to be placed on the desktop instead". Click the "Yes" button, and the dialer icon will appear on your desktop screen.8. To start your Internet connection, double-click the dialer icon to open the dialer program. Type your "User name" and "Password" IDs exactly as they appear in your email confirmation. Check/Select the "Save password" option. 9. Click the "Connect" button, and a "Status" box will appear to display the progress of your connection attempt. That box will disappear once you've successfully established your Internet connection.
|