We have broadband packages that will fit your needs.
From low-cost solutions from Ł17.99 and speeds upto 8Mps down and 896Kbps up.

	Webmail
	Forums
	Control Panel
	Status

Click here for quality, high speed broadband, upto 8Mbps

BROADBAND NOW WITH FREE ACTIVATION / MIGRATION SAVING UPTO Ł50

Register Now

>> Free Dialup <<

Username : surf
Password : surf

Access Number :
0845 604 1528 (56k/64k)
(Calls charged at local rate) sspam@surfanytime.com

Dialup Setup Information :

For specific instructions to set up your computer to automatically dial SurfAnytime and connect to the internet, we have easy to use, step-by-step instructions for:

Windows 95	Windows 98	Windows ME	Mac OS9
Windows NT	Windows 2K	Windows XP	Mac OSX

1. Click the Windows "Start" button and then "Control Panel". If you're running Windows XP in classic mode, you will need to click the "Start" button and then "Control Panel".

2. If you are in the Classic View mode, within the "Control Panel", double-click the "Network Connections" icon. If you are in the Category View mode, within the "Control Panel", click the "Network and Internet Connections" category, click the "Network Connections" icon.

3. Click the "Create a new connection" icon to open the setup wizard, and click the "Next" button. Select the "Connect to the Internet" option, and click the "Next" button.

4. Select the "Set up my connection manually" option, and click the "Next" button. Select the "Connect using a dial-up modem", and click the "Next" button.

5. Type SurfAnytime in the "ISP Name" field, and click the "Next" button.

6. Within the "Phone number" section, type the SurfAnytime dialup number that is local to your area, and click the "Next" button. SurfAnytime dialup numbers can be found at http://www.surfanytime.net/support

7. Within the "User name" and "Password" sections, type in your IDs exactly as they appear in your confirmation email.

8. Select the option "Use this account name and password when anyone connects to the Internet from this computer".

9. DO NOT select the "Make this the default Internet connection" or "Turn on Internet Connection Firewall for this connection" options. Click the "Next" button to continue.

10. A confirmation box will verify the successful creation of your dialer. Select the option "Add a shortcut to this connection to my desktop", and click the "Finish" button, which will create an icon for the dialer on your desktop screen.

The above has configured a single, 64K connection on your machine. Now, we will configure it to dial the two channels to 128K.

1. Click "Start", "Settings", and then "Control Panel". Within "Control Panel", double-click the "Dial-Up Networking" icon, and right-click the connection icon you created above.

2. Click on Properties

3. Cick on the General tab
a. Check the boxes next to the modems you wish to use
b. Check the box next to "All devices dial the same phone number"
c. Enter the appropriate access number in the telephone box.

4. Click on Options tab: In the "Multiple Devices" box, choose "Dial all devices"
5. Click on Networking tab
6. Click on Settings tab

a. "Enable LCP Extensions" should NOT be checked
b. "Enable Software Compression" should be checked
c. "Negotiate multi-link for single-link connection" should be checked

7. Click OK and OK again to close out of dialog boxes.
8. Finished.

To start your Internet connection, double-click the dialer icon to open the dialer program. Your username and password should appear, and you'll want to check the "Save Password" option.

Click the "Dial" button, and a "Status" box will appear to display the progress of your connection attempt. That box will disappear once you've successfully established your Internet connection.